Vive Health Transport Wheelchair

How To Assemble

• Unfold the transport wheelchair by slowly pulling the armrests a part until the seat is fully extended
• Raise the hand grips upward until the backrest is fully extended and the bars snap into place with an audible click
• Position the footrests on the placement tabs on the transport chair frame. Swing the footrests towards the center to engage the locking lever

How To Adjust The Footrest Height

• Remove the footrest by releasing the locking lever and swinging the footrest outward
• Using a 14mm wrench, loosen the bolt on the underside of the footrest assembly
• Raise or lower the footplate to the desired position, ensuring the foot plate will be a minimum of 2” from the floor for safe clearance
• Tighten the bolt and reinstall the footrest

How To Fold the Transport Wheelchair

• Locate two black tabs on the back of the transport chair frame and push the tabs downward to release the handles
• Gently lower the hand grips until they are tucked neatly against the seat of the chair. Note: the hand grips do not extend under the seat
• Holding both armrests, pull the armrests together until the seat is completely folded

Care Instructions

• Wipe down with a damp cloth and disinfectant solution as necessary.
• Dry immediately with a lint-free cloth.

What’s Included

• Transport Wheelchair
• Lifetime Guarantee

Warranty

• Three year warranty on the frame from the date of purchase
• One-year warranty on the dual motors and joystick controller from the date of purchase
• Six month limited warranty on the lithium battery from the date of purchase